Chim-Flex Stainless Steel Chimney Lining System



Lindemann Chimney Supply sells wholesale only  to the chimney and hearth industry.


Chim-Flex 316L Stainless Steel Liner Kits

CHIM-FLEX® chimney liner may be installed into a masonry chimney that is structurally sound and built of solid masonry brick, block, or concrete block at least 4 inches in thickness.

CHIM-FLEX® chimney liner must be installed with 2 (two) layers of CHIM-WRAP® 8lb Density 1/4” insulation or 1(one) layer of CHIM-WRAP® 8lb Density 1/2” Insulation and 1(one) layer of CHIM-MESH® insulation covering. Clearance from the exterior surfaces of the masonry chimney to be maintained is "0" (zero) inches. There must be no embedded combustables!

Downloads:

Chim-Flex Stainless Steel Liner Kit
in a Box!
A top quality manufacturer to the hearth industry for nearly 20 years, Chim-Flex Stainless Steel liner is made of type 316L, including fittings. The liner is loced with a four-layer overlap crimp design and is so flexible you get a complete lining system in a box! This means your liner can ship less expensively via UPS.

With an installer's background in the industry, they know the special challenges faced in the field - and answer those challenges by designing and manufacturing products that look better and work better.

UL Listed to 1777
Can combine rigid and flex pipe where needed
Exclusive LIFETIME PLUS warranty
Can be insulated with Thermix or CHIM-WRAP insulation blanket
Exclusive REMINDERS program for warranty service
When you install a CHIM-FLEX liner, you're automatically enrolled in their Customer Reminder program which will help your customer remember to schedule their annual inspection with you. Here's all you do:

1.  Purchase and install a CHIM-FLEX chimney liner.
2. Complete the warranty card and include the date you would like your customer to be reminded. Return warranty to RLH.
3. RLH will send a reminder postcard to your customer on the date you requested.

FREE SHIPPING on liner orders of 50'
CHIM-FLEX Complete Liner Kit
Complete Liner Kit in a box in 3" to 8" diameters.
 Kit Includes: liner, long snouted tee & tee cap, critter cap, flat top flashing and storm collar. You can substitute the tee/tee cap for a sleeve if you need to make a direct connection to an appliance. Insulation is NOT included in the kit. You must use Thermix or Chim-Wrap for a UL listed installation. Specify your pipe kit length. Components also available separately.
Dia.
3"x25'
4"x25'
5"x25'
6"x25'
7"x25'
8"x25'
Item#
362325
362425
362525
362625
362725
362825
Dia.
3"x35'
4"x35'
5"x35'
6"x35'
Item#
362335
362435
362535
362635

Components
 Tee with Tee Cap
Features a removable take-off which is tightened fromwithin the tee snout. Tee cap has 4 pre-drilled holes for securing with screws. 24 gauge 316L Stainless Steel.
Dia.
3"
4"
5"
6"
7"
8'
Item#
 Sleeve mates 2 pieces of pipe; works to join flex pipe sections together or to mate rigid and flex pipe. One male and one female end. Dripless design keeps creosote and moisture inside the liner and away from masonry. 24 gauge 316L Stainless Steel.
Dia.
3"
4"
5"
6"
7"
8'
Item#
Flat Top Flashing Seals off installation after the liner has been installed. Has pre-punched collar/clamp for easy installation. Measures 15" x 15". 24 gauge 316L stainless.
Dia.
3"
4"
5"
6"
7"
8'
Item#
Critter Cap Slides into the top of the Flat Top flashing. Improved clamping system. Mesh keeps out birds & animals. Made of 24 gauge 316L stainless.
Dia.
3"
4"
5"
6"
7"
8'
Item#

Insulation
Chim-Flex liner requires insulation to meet the UL1777 standard. Either a CHIM-WRAP foil-faced blanket or Thermix is acceptable.
 CHIM-WRAP Blanket
  22" x 25' (fits 3"-6" pipe)
  24' x 25' (fits 7" pipe)
  29" x 25' (fits 8" pipe)
Item #

393022
393024
393029


 Aluminum Foil Tape
One 3" roll, 150' length
391200
 ProMesh Wire Mesh
Small - 25' roll (fits 3" to 6" liner)
Large - 25' roll (fits 7"-9" liner)
Extra Large - 25' roll (fits 10"-12" liner)
391101
391102
391103
 Make-A-Clamp Kit
  Mini Kit (8-1/2' of band, 3
  fasteners, 1 splice)
  Large Kit (50' of band, 10
  fasteners, 5 splices)

  10 extra fasteners
391001

391002


391003


 Stainless Steel Wire, 1 lb.
(approx. 375')
391009
 Thermix Insulation
42 lb. bag
42 lb. bag, boxed for UPS shipment
390142
390143




Copyright Lindemann Chimney Supply 2005