|
|
Hand Seamer comes in handy any time you need to bend a flat piece of sheet metal or hold a small piece of metal when you need to trim off an edge.
|
600800
|
|
 |
|
|
Pipe Crimpers 5 bladed crimpers have a high quality construction and are inteded for heavy duty usage
|
600900
|
|
|
|
|
Bull Snips Stainless steel snips have an 18 gauge capacity. Jaws are hot drop forged from high carbon alloy steel and fully heat treated.
|
600500
|
|
|
|
|
Offset Shears are useful for cutting sheet metal, stove pipe or liner pipe. Offset design guides the cut metal away from hands. Choose right or left handed shears.
|
Right handed shears
|
601100
|
|
Left handed shears
|
601000
|
|
|
|
|
Tin Snips 12" tin snips used for cutting sheet metal, stainless steel and galvanized pipe. The longer handles gives maximum cutting ability with less work.
|
601400
|
|
|
|
|
Nut Driver 5/16" nut driver will fasten all Ventinox FasClamp & most Heat Fab products. 3/8" nut driver fits most chimney caps.
|
3/8" Nut Driver
|
600319
|
|
5/16" Nut Driver
|
600320
|
|
1/4" driver for No.8 screws
|
600200
|
|
5/16" driver for No. 10 screws
|
601708
|
|
|
|
|
Hex Headed Chuck Driver
|
|
|
|
|
|
Quick Change Adapter accepts chuck driver and hex bits for your drill without a key, by retracting the adapter sleeve
|
601600
|
|
|
|
|
|
Pop Rivet Gun is needed for inserting pop rivets. Unlike screws, pop rivets stay in place and never come out.
|
601200
|
|
|
|
|
Caulking Gun has pressure release trigger that makes for a mess-free storage with the caulking tube in place.
|
601300
|
|
|
|
100' Tape Measure great for measuring for chimney height. Has a big handle for easy carrying to the rooftop
|
601800
|
|
|
|
|
Hole Cutter adjusts for making 2" to 12" holes in galvanized sheet metal. Installs into a standard electric drill. Use with Cutting Bit to form access holes.
|
Plenum/Duct Hole Cutter
|
601001
|
|
|
|
|
Hole Saw is perfect for installing fresh air intakes. When cutting holes in corrugated liner use the metal hole saw in reverse for a cleaner cut.
|
3" Hole Saw - Metal
|
601703
|
|
4" Hole Saw - Metal
|
601704
|
|
5" Hole Saw - Metal
|
601705
|
|
4-1/4" Vent Saw
|
601744
|
|
13" Hole Saw Extension
|
601701
|
|
Hole Saw Pilot Bit
|
601700
|
|
|
|
|
|
|
|
Cutting Bit is for use with the Hole Cutter to cut holes in galvanized sheet metal.
|
601002
|
|
|
|
|
|
|
|
Cut Off Wheel use this fiber mesh wheel with a 4-1/2" grind to: cut stainless steel liners, trim galvanized connector pipe, remove steel inserts and more. 4.5 x .40 x 7/8
|
603700
|
|
|
|
|
Utility Knife basic utility knife with tough aluminum case and retractable blade. Spare blades are stored in the body.
|
609024
|
|
Replacement blades
|
609025
|
|
|
|
|
Sawz-All Blades is ruggedly built for starting holes in glaze blockages and provides solid impact. Fits ProFlex LockFast rods.
|
Boring Tool
|
505800
|
|
Exper Diamond Blades
|
Exper diamond blades offer unsurpassed quality and value, backed by a lifetime warranty. (The bond between the segment/cutting rim and the core are guaranteed during normal operaiton; if this bond fals during the life of the blade, the blade will be replaced free of charge.) We carrry a wide variety of blades to ensure you'll have the exact blade for your application and the tool you're using.
|
|
|
High Speed Laser Blades are designedfor dry cutting with a 12" or 14" high speed saw. Use on concrete block, brick, brick pavers or stone.
|
Economy - 12" x .110" x 1
|
602013
|
|
Economy - 14" x .110" x 1
|
602015
|
|
Standard - 12" x .110" x 1
|
602012
|
|
Standard - 14" x .110" x 1
|
602014
|
|
Premium - 12" x .110" x 1
|
604013
|
|
Premium - 14" x .110" x 1
|
604015
|
|
|
|
|
Masonry Brick and Block Laser blade designed for dry or wet sawing with a 14" masonry saw. used on hard to medium rick and paving brick only.
|
14" x .125 x 1
|
603314
|
|
|
|
|
General Purpose Laser blade is designed for wet or dry sawing with a hand-held grinder or power saw. used on concrete, tile, masonry and stone
|
4" x .080"
|
603504
|
|
4.5" x .080"
|
603545
|
|
7" x .087"
|
603507
|
|
|
|
|
Tuckpointing Blade 1/4" Tuckpointing Blade is designed for grinding of mortar joings before tuckpointing.
|
4" x .250"
|
606104
|
|
4.5" x .250"
|
606145
|
|
7" x .250"
|
602017
|
|
|
