 |
|
Lindemann Chimney Supply sells wholesale only to the chimney and hearth industry.
|
|
|
Saf-T-Liner from
Heat Fab
Downloads:
|
 Heat Fab rigid stainless steel SAF-T-LINER is a great solution to lining a straight masony chimney, and for connectors where galanized pipe isn't enough. UL listed to the 1777 standard when used in conjunction with Heat Fab's Saf-T-Wrap insulation.
Ideal for relining chimneys that have deteriorated lining, oversized lining, or for lining chimneys with no existing lining, Heat-fab's Saf-T Liner System adds years to the life of a chimney. The product's resistance-welded, 24-gauge stainless steel fabrication meets code requirements and provides optimum safety. As a substitute for 5/8" fireclay liner, Saf-T Liner cannot be beat.
Saf-T Liner is Tested and Listed by Underwriters Laboratories for use with Listed fuel burning equipment that produce continuous flue gas temperatures not above 1000°F when properly insulated with Saf-T Wrap Chimney Liner Insulation.
Saf-T Liner Uses:
 Appliance connector--non-condensing appliances Chimney Liner System
Chimney Reliner System
FEATURES
Laser and advanced resisted welded seams are designed to withstand overheating and chimney fires.
Precision cut system components fit perfectly.
Inverted bead design with pop rivets produces a secure endjoint connection, prevent slipage and facilitates installation.
Can be used as a liner or connector pipe.
24 gauge seam welded, type 304 stainless steel.
10 year factory wrranty whenused in wood burning systems.
Competitively priced.
Installed by connecting sections together with stainless steel rivets. One end of the pipe is pre-drilled. Rivets are provided.
Slip joint sections allow installation of exact length needed without cutting pipe.
About THIMBLES
The thimble is perhaps the most dangerous and overlooked portion of the venting system. Protect combustibles by using a UL listed wall pass through to meet the chimney. Saf-T-Thimble will complete the job with a solid-pack design for ultimate wall protection.
|
|
Pipe Sections
|
|
|
(Custom sizes also available by special order)
|
Rigid Lengths feature welded seam. 6", 7", 8" diameters are stock items; 5", 9", 10" and 12" are available by special order
|
Size
|
5" x 12'
|
6" x 1'
|
7" x 12'
|
8" x 12'
|
Item #
|
340105
|
340106
|
340107
|
340108
|
|
Size
|
5" x 18"
|
6" x 18"
|
7" x 18"
|
8" x 18"
|
Item #
|
340205
|
340206
|
340207
|
340208
|
|
Size
|
5" x 24"
|
6" x 24"
|
7" x 24"
|
8" x 24"
|
Item #
|
340305
|
340306
|
340307
|
340308
|
|
Size
|
5" x 36"
|
6" x 36"
|
7" x 36"
|
8" x 36"
|
Item #
|
340405
|
340406
|
340407
|
340408
|
|
Size
|
5" x 48"
|
6" x 48"
|
7" x 48"
|
8" x 48"
|
Item #
|
340405
|
340406
|
340407
|
340408
|
|
|
Pre-insulated 4' sections, pack of 2
|
Size
|
5" x 48"
insulated
|
6" x 48"
insulated
|
7" x 48"
insulated
|
8" x 48"
insulated
|
Item #
|
n/a
|
340706
|
340707
|
340708
|
|
Adjustable Pipe 50" to 90" length, pack of 2
|
Size
|
5" x 48"
|
6" x 48"
|
7" x 48"
|
8" x 48"
|
Item #
|
n/a
|
340806
|
340807
|
340808
|
|
Slip Connector
18" length, adjusts 4"-16"
|
Size
|
5" x18"
|
6" x 18"
|
7" x 18"
|
8" x 18"
|
Item #
|
342405
|
342406
|
342407
|
342408
|
Note: 5", 9", 10", 12" pipe & components are non-stock, special order items.
|
|
Saf-T-Wrap Insulation
|
|
|
|
Saf-T-Wrap Insulation is a metal jacketed insulation section that is wrapped around the liner. Available in 24" long sections. Also available in a tee section. REQUIRED for use with Heat Fab Saf-T-Liner to meet UL1777 listing.
5", 9", 10" and 12" are available by special order
|
Size
(straight pipe)
|
5" x 24"
|
6" x 24"
|
7" x 24"
|
8" x 24"
|
Item #
|
342005
|
342006
|
342107
|
342108
|
|
Size
(tee section)
|
5" tee section
|
6" tee section
|
7" tee section
|
8" tee section
|
Item #
|
342305
|
342306
|
342307
|
342308
|
|
|
Components
|
|
|
|
Tee with removeable take-off
5", 9", 10" and 12" are available by special order
|
Size
|
5"
|
6"
|
7"
|
8"
|
Item #
|
342605
|
342606
|
342607
|
342608
|
|
|
|
Tee Cover
5", 9", 10" and 12" are available by special order
|
Size
|
5"
|
6"
|
7"
|
8"
|
Item #
|
342705
|
342706
|
342707
|
342708
|
|
|
|
Adjustable Elbow adjusts from 90 degrees to straight. Allows for minor offsets.
|
Size
|
5"
|
6"
|
7"
|
8"
|
Item #
|
341005
|
341006
|
341007
|
341008
|
|
|
|
Corrugated Elbow adjusts from 90 degrees to straight. Allows for minor offsets. 5", 9", 10" and 12" are available by special order
|
Size
|
5"
|
6"
|
7"
|
8"
|
Item #
|
341705
|
341706
|
341707
|
341708
|
|
|
|
15 degree Elbow
5", 9", 10" and 12" are available by special order
|
Size
|
5"
|
6"
|
7"
|
8"
|
Item #
|
341105
|
341106
|
341107
|
341108
|
|
|
|
30 degree Elbow
5", 9", 10" and 12" are available by special order
|
Size
|
5"
|
6"
|
7"
|
8"
|
Item #
|
341305
|
341306
|
341307
|
341308
|
|
|
|
45 degree Elbow
5", 9", 10" and 12" are available by special order
|
Size
|
5"
|
6"
|
7"
|
8"
|
Item #
|
341505
|
341506
|
341507
|
341508
|
|
|
|
Reducer/Increaser features 2 big ends for field crimp (photo shows crimp but these ship uncrimped).Step design for maximum draft.
5", 9", 10" and 12" are available by special order
|
Size
|
4"-5"
|
5"-6"
|
6"-7"
|
7"-8"
|
Item #
|
344045
|
344056
|
344067
|
344078
|
|
|
|
HF/V Adapter is used to mate Ventinox VG liner with Saf-T-Vent components for top & bottom terminations.
5", 9", 10" and 12" are available by special order
|
Size
|
5"
|
6"
|
7"
|
8"
|
Item #
|
343305
|
343306
|
343307
|
343308
|
|
|
AL29-4C Tee Extender is used to extend either a Ventinox or Heat Fab Tee snout. Made of AL29-4C stainless steel.
|
Size
|
5"
|
6"
|
7"
|
8"
|
Item #
|
343505
|
343506
|
343507
|
343508
|
|
|
|
Masonry Crown Adapter allows for liner to expand and contract when passing through a masonry crown.
5", 9", 10" and 12" are available by special order
|
Size
|
5"
|
6"
|
7"
|
8"
|
Item #
|
n/a
|
340906
|
340907
|
340908
|
|
|
Available in:
13"x13"
13"x18"
18"x18"
|
Top Plate Sturdy 18 gauge stainless steel. 3 sizes.
5", 9", 10" and 12" are available by special order
|
Size
|
13" x13"
5" dia.
|
13"x13"
6" dia.
|
13"x13"
7" dia.
|
13"x13"
8" dia.
|
Item #
|
344405
|
344406
|
344407
|
344408
|
Size
|
13" x18"
5" dia.
|
13"x18"
6" dia.
|
13"x18"
7" dia.
|
13"x18"
8" dia.
|
Item #
|
344305
|
344306
|
344307
|
344308
|
|
|
|
Top Clamp Supports the Heat Fab liner and is used between the Storm Collar and Top Plate.
5", 9", 10" and 12" are available by special order
|
Size
|
5"
|
6"
|
7"
|
8"
|
Item #
|
344205
|
344206
|
344207
|
344208
|
|
|
|
Top Kit Includes Storm Collar, Top Clamp, Top Plate
5", 9", 10" and 12" are available by special order
|
Size
|
5"
|
6"
|
7"
|
8"
|
Item #
|
344605
|
344606
|
344607
|
344608
|
|
|
|
Storm Collar Sheds water away from the hole in the top plate.
5", 9", 10" and 12" are available by special order
|
Size
|
5"
|
6"
|
7"
|
8"
|
Item #
|
342505
|
342506
|
342507
|
342508
|
|
|
|
Rain Cap mushroom design, slides inot the liner
5", 9", 10" and 12" are available by special order
|
Size
|
5"
|
6"
|
7"
|
8"
|
Item #
|
341905
|
341906
|
341907
|
341908
|
|
|
SAF-T-THIMBLE
|
|
|
|
Heat Fab "Saf-T-Thimble"
17" x 17" OD thimble with solid pack insulation that telescopes inward. Adjusts to wall thicknesses of 4" to 8-1/2". Two sizes available.
|
Fits Pipe Size
|
5" to 6" Saf-T-Timble
|
6" to 7" Saf-T-Thimble
|
Item #
|
345005
|
345007
|
|
|
