Security Chimney



Lindemann Chimney Supply sells wholesale only  to the chimney and hearth industry.


Security Chimney
"Secure-Temp"
Class A, All Fuel Chimney System

Security chimneys are made of stainless steel for outstanding resistance to corrosion and features exclusive Secura Plus-2 insulation for minimum heat loss. This new design is 25% lighter than previous Security chimney!

Easier to install! Features Twist-Lock assembly so locking bands are not required.

Requires only 2" clearance from combustibles.

Available in Stainless Steel or Zinc-Coated Galvalume outer casing.

DOWNLOADS:
Secure TempTM ASHT+ insulated stainless steel high-temperature chimney is listed to standards established for temperatures of 2100°F for venting solid-fuel, oil, gas and coal appliances.

Tested to UL 103HT in all diameters.

The Secure TempTM ASHT+ is also available in aluminum-zinc coated steel exterior casing.
Coupler system, Twist-Lock assembly for fast and easy installation;
no screws or other attachments required
Double-lapped flue seam provides radial expansion; this prevents flue from separating or buckling
Secura Plus-2 insulation, pressure-packed to retain high-flue temperatures; totally non-caustic and chloride free
Available in 5" to 10" inside diameters
2" safety clearance from combustible materials with all diameters
Available in 8", 12", 18", 24", 36" and 48" lengths
A maximum offset of 30 degrees from vertical is allowed using a maximu mof two offsets (4 elbows). 15 and 30 degree elbows available.
12" adjustable lengths also available
Galvalume or stainless steel components that don't rust
Lifetime limited warranty
Pipe Lengths, including tees and elbows, are available in Stainless Steel (SS) or in Galvalume (Galv.) outer wall casing finish
Pipe Length
6" ID
7" ID
8" ID
8" SS
200806
200807
200808
8" Galv.
200816
200817
200818
12" SS
201206
201207
201208
12" Galv.
201216
201217
201218
18" SS
201806
201807
201808
18" Galv.
201816
201817
201818
24" SS
202406
202407
202408
24" Galv.
202416
202417
202418
36" SS
203606
203607
203608
36" Galv.
203616
203617
203618
48" SS
204806
204807
204808
48" Galv.
204816
204817
204818
12" SS
Adjustable
205106
205107
205108
12" Galv.
Adjustable
205116
205117
205118



6" ID
7" ID
8" ID
 SS Tee with
Tee Cap
203906
203907
203908
Galv. Tee with
Tee Cap
203916
203917
203918

Tee Cap,
Twist Lock
for use with the adjustable wall support.
6" ID
7" ID
8" ID
205306
205307
205308

Tee Trim Collar
covers the exposed end of the chimney
6" ID
7" ID
8" ID
209996
209997
209998

Flue Extension
6" ID
7" ID
8" ID
209006
209007
209008

6" ID
7" ID
8" ID
SS 15 Deg. Offset Elbow
201506
201507
201508
 Galv. 15 Deg. Offset Elbow
201516
201517
201518
6" ID
7" ID
8" ID
SS 30 Deg. Offset Elbow
203006
203007
203008
Galv. 30 Deg. Offset Elbow
203016
203017
203018

Finish Support
Supports the chimney from a flat ceiling
6" ID
7" ID
8" ID
204206
204207
204208
Adjustable Finish Support
Sliding arms allow minimal framing into a ceiling with up to 24" on center. Measures
12" x 12"
6" ID
7" ID
8" ID
204106
n/a
n/a

Cathedral Support

Supports the chimney from a cathedral ceiling
6" ID
7" ID
8" ID
204306
204307
204308
Cathedral Support Extension
(6"-10")
Extends the Cathedral Support for A-frame and steep pitched ceilings
6" ID
7" ID
8" ID
200600
200600
200600
Wall Support
Supports at the base of the installation. Male coupler attaches the first section of chimney
6" ID
7" ID
8" ID
204006
204007
204008
Adjustable
Wall Support
Supports at the base of the intallation. Adjusts out up to 6" from a wall.Clamps around chimney.
6" ID
7" ID
8" ID
204706
204707
204708
Insulated
Wall
Radiation Shield
Protecs combustible materials when chimney passes through a wall. Requires a length of chimney.
6" ID
7" ID
8" ID
206306
206307
206308
Floor
Support
Supports the chimney on a slab floor or joist. Tightening collar locks chimney in place.
6" ID
7" ID
8" ID
204606
204607
204608
Universal
Roof Support
Supports the chimney from any pitched roof or above an offset. 2 "wings" screw to the sturcture at any pitch.
6" ID
7" ID
8" ID
200200
200200
200200
Anchor Plate
Attaches to masonry or metal. Provides twist lock connection to the chimney.
6" ID
7" ID
8" ID
204506
204507
204508
Universal
Roof Brace
Stabilizes chimney above roof line. Tightening collar and adjustable legs.
6" ID
7" ID
8" ID
200300
200300
200300
Universal Offset
Support
Supports chimney above the offset ona vertical wall. Allows a 2" to 4" lateral adjustment
6" ID
7" ID
8" ID
200100
200100
200100
Universal
Wall Band
Stabilizes chimney; provides 2" clearance from combustibles. Use every 8'
6" ID
7" ID
8" ID
200400
200400
200400
Reinforced
Wall Band
Better wall band for high wind areas. Use with extension for adjustability.
6" ID
7" ID
8" ID
205206
205207
205208
Wall Band Extension
Used in combination with a reinforced wall band, it extends the clearance from 2" to 4".
6" ID
7" ID
8" ID
204906
204907
204908
Firestop
Fills the gap where the chimney passes through a ceiling.
6" ID
7" ID
8" ID
206006
206007
206008
Insulated
Attic
Radiation Shield
Keeps insulation & animal nests away from the chimney where it passes through the attic
6" ID
7" ID
8" ID
206206
206207
206208

Flashing for
Flat Roof
6" ID
7" ID
8" ID
207006
207007
207008

Adjustable
Roof Flashing
for
1/12 - 7/12
roof pitch
6" ID
7" ID
8" ID
207106
207107
207108

Adjustable
Roof Flashing
for
8/12 - 12/12
roof pitch
6" ID
7" ID
8" ID
207206
207207
207208
Adjustable
Roof Flashing
for
12/12 - 21/12
roof pitch
6" ID
7" ID
8" ID
207306
207307
207308
Peak Roof Flashing
1/12-7/12
6" ID
7" ID
8" ID
207406
207407
207408
Peak Roof Flashing
8/12-12/12
6" ID
7" ID
8" ID
207506
207507
207508
Storm Collar
Provides a weathertight seal and is automatically supplied with roof flashings.
6" ID
7" ID
8" ID
208006
208007
208008
Rain Cap
Prevents rain, snowand leaves from ntering the chimney. Optional spark arrestor, below
6" ID
7" ID
8" ID
209906
209907
209008
Universal Spark Arrestor Band required in some localities to prevent dispersion of sparks
6" ID
7" ID
8" ID
200500
200500
200500



Copyright Lindemann Chimney Supply 2005