 |
|
Lindemann Chimney Supply sells wholesale only to the chimney and hearth industry.
|
|
|
Security Chimney
Pellet Vent
DOWNLOADS:
|
|
|
|
|
|
|
Pellet Venting Installation Tips
 It is recommended to provide some vertical rise on pellet vent. Although not always required by the manufacturer, this will provide some natural draft in the vent of a sudden disruption in power.
 Keep black paint on hand to paint visible components inside the house for a finished look
Although not required, some installers use Aluminum Tape as an extra seal on Pellet vent pipe at each joint
Do you service pellet stoves or their venting system?
This is a specialty service your customers need - and we have the specialty tools to get the job done!
If you offer pellet stove repairs, the right diagnostic tools are a must! Digital Multi-Meter with Temperature Readout measures DCV, ACV, DCA, OHM, temperature and audi-continuity
This FIRE STARTER GEL is great for starting pellet stoves. Make sure and keep some on your truck to offer to your customers!
|
6" length, galvanized
|
230603
|
|
12" length, galvanized
|
231203
|
|
12" length, black (5" diameter; used as a sleeve over standard pellet pipe)
|
231213
|
|
24" length, galvanized
|
232403
|
|
36" length, galvanized
|
233603
|
|
48" length, galvanized
|
234803
|
|
60" length, galvanized
|
236003
|
|
|
|
Adjustable length,
3"-12", galvanized
|
230303
|
|
Adjustable length,
4' to 7.5', black
(5" diameter; used as a sleeve over standard pellet pipe)
|
234813
|
|
|
|
Tee with cap, galvanized
|
233903
|
|
Twist lock tee cap
|
233103
|
|
|
|
45 degree elbow, galv.
|
234503
|
|
90 degree elbow, galv.
|
239003
|
|
90 degree elbow, black
(5" diameter; used as a sleeve over standard pellet pipe)
|
239013
|
|
|
|
Stove Adapter
|
235203
|
|
|
|
Ceiling Support, Galv.
|
234203
|
|
|
|
Firestop
|
236103
|
|
|
|
Insulated Wall Thimble
|
236303
|
|
|
|
Wall Band
|
230403
|
|
|
|
Wall Support
|
234003
|
|
|
|
Adjustable Flashing
(flat roof flashing & peak roof flashing are special order items)
|
237103
|
|
|
|
Storm Collar
|
238003
|
|
|
|
Horizontal Jet Cap, galv.
|
239803
|
|
|
|
Vertical Cap, Galv.
|
239903
|
|
|
|
Decorative Finish Collar
|
238013
|
|
Chimney Liners for Pellet Stove Venting
|
|
|
Complete Stainless Steel Liner Kit in a box from Chim-Flex
Kit Includes: liner, long snouted tee & tee cap, critter cap, flat top flashing and storm collar. You can substitute the tee/tee cap for a sleeve if you need to make a direct connection to a rear vent appliance. Insulation is NOT included in the kit. You must use Thermix or Chim-Wrap for a UL listed installation. Specify your pipe kit length. Components also available separately - click here
|
Dia.
|
3"x25'
|
4"x25'
|
3"x35'
|
4"x35'
|
Item#
|
362325
|
362425
|
362335
|
362435
|
|
|
