TOP 6 TIPS FOR GLASS FIREPLACE DOOR REPLACEMENT

Whether your customers have a damaged or broken door or are simply looking to update their fireplace, glass door replacement is a common service for a sweep to complete. While the job is often accomplished in a short period of time, there are some ways to make the process even easier.

Here are the top 6 tips for glass fireplace door replacement:

1. Take care when replacing doors on older brickwork. It could be brittle and may be more prone to breakage during drilling.

2. Never lay the replacement door on its front. This could damage the unit.

3. When drilling the holes for the unit, always drill into brick and not mortar. Also make sure to drill straight down.

4. Do not over tighten the unit’s screws. This could lead to breakage on the screw’s head or loosen the anchor placed in the brick.

5. Once in place, gently wiggle the newly installed replacement door checking for any movement. If the unit feels wobbly, check for loose screws you may have missed.

6. When finished, use water and a rag or specially designed glass cleaner to remove any leftover debris. Do not use oven cleaner as this could etch the glass.

If followed on a consistent basis, these 6 tips can make the replacement of your customer’s glass fireplace doors a simple task. Remember also to always measure carefully the existing unit prior to ordering a new one. If you have further questions about glass fireplace replacement units, contact our expert staff at Lindemann Chimney Supply for assistance.