• Home
  • Enervex ADC150 Modulating Fan Control

Enervex ADC150 Modulating Fan Control

(0) No Reviews yet
$1,123.87
SKU: 130117
DESCRIPTION: The ADC150 is a Modulating Fan Control used with up to 2 appliances to monitor and maintain a constant draft or pressure in a chimney or duct. The ADC150 can be used with models RS, RSHT and GSV fans. It can control the fan speed directly or via a Variable Frequency Drive (VFD, sold separately). The ADC150 is typically used to control the draft of sealed, gas-fired fireplaces or water heaters.
  • It can control the fan speed directly or via a Variable Frequency Drive (VFD, sold separately)
  • 2-year factory warranty
  • Monitors the draft in a chimney system via a connection to a pressure transducer (XTP2) attached to the chimney, and maintains the draft by modulating the fan speed
  • The control has an integrated safety system that assures the heating appliance(s) is shut down in case of insufficient draft after 15-180 seconds
Enervex ADC150 Modulating Fan Control

The ENERVEX ADC150 is a Modulating Fan Control used with up to 2 appliances to monitor and maintain a constant draft or pressure in a chimney or duct. The ADC150 can be used with models RS, RSHT, and GSV fans. It can control the fan speed directly or via a Variable Frequency Drive (VFD, sold separately). The ADC150 is typically used to control the draft of a gas-fired, sealed fireplace or water heaters.

The ADC150 monitors the draft in a chimney system via a connection to a pressure transducer (XTP) attached to the chimney, and maintains the draft by modulating the fan speed. It provides a 10-120V AC power to single phase fans and 0-10V DC control signal to control 3-phase fans via a variable frequency drive.

The control has an integrated safety system that assures the heating appliance(s) is shut down in case of insufficient draft after 15-180 seconds (user adjustable). The ADC150 has an integrated damper relay that works with ENERVEX MFD (Mechanical Fireplace Damper) to automatically open the damper prior to fan initialization and close the damper after the appliance shuts down. End-switches in the damper actuator wired to the ADC150 ensure the damper must be fully open prior to allowing the appliance to operate. The control also features a post purge function (3 min) to evacuate the chimney system of residual flue gases after the appliance shuts down.

Material
The enclosure is made of NEMA 1 rated ABS plastic.

Standard Equipment
• ADC150 Control Box
• XTP Pressure Transducer 
• Stack Probe
• 6' Silicone Tubing

Listings

The ADC150 Fan Control is ETL Listed in the U.S. and Canada:

• UL 508 Standard for Industrial Control Equipment (17th Ed.)
• CSA C22.2 No. 14-05 - Standard for Industrial Control Equipment Warranty 2-Year Factory Warranty. Complete warranty conditions are available from ENERVEX Inc.

Product Information:

Ratings & Reviews

No reviews available

Be the first to Write a Review