• Home
  • AW Perkins 500° Silicone Sealant

AW Perkins 500° Silicone Sealant

(0) No Reviews yet
SKU: AW Perkins 500° Silicone Sealant

Product Description

This silicone is a high-performing, neutral cure silicone, offering excellent adhesion to most plastics, metals, and glass including top plates, storm collars, and more. It’s fast curing, contains no solvents, and is non-corrosive. It does not shrink or harden. Available in a convenient 10.3 ounce cartridges in  either black or clear.

Technical Specifications

  1. Surface must be clean and dry. Use acetone to degrease and improve adhesion. 
  2. Remove cap, cut nozzle tip to size.
  3. Puncture inner seal and place cartridge in a standard caulking gun. 
  4. Apply by pushing sealant ahead of nozzle for best adhesion.
  5. Tool immediately for best results.
  6. Tack-free in minutes and fully cured in most applications within 24 hours. 
  7. Clean up spills without smearing by using a spatula or putty knife.
  8. To best save remaining silicone replace cap after filling it with sealant. 

Ratings & Reviews

No reviews available

Be the first to Write a Review