Enervex GSV Pizza Oven Fans
THE WORLD'S FINEST LINE OF PIZZA OVEN EXHAUST FANS
These fans are designed to withstand the high temperatures associated with stone hearth cooking, and creosote production that results from solid fuel burning. The construction of the exhaust fan's axial vanes creates a self-cleaning effect. Whether venting your pizza oven through a hood or through a direct chimney connection, the GSV is the perfect fan for the job.
FINISH THE JOB, THE RIGHT WAY
The GSV is part of a mechanical draft fan for use as part of a restaurant kitchen pizza oven exhaust system or grease application.
Ensures a negative pressure in the entire duct or vent system. Discharges vertically (horizontally, if side-wall mounted) at a high velocity. The fan housing is hinged and the top can be opened for easy service and access to stack. The construction of the exhaust fan’s axial vanes creates a self-cleaning effect. The fans are designed to withstand the high temperatures associated with stone hearth cooking, and creosote production that results from solid fuel burning. The GSV model is approved for temperatures up to 575° F (300°C). Exhaust fan for installation at the duct or vent termination point, vertical or side-wall mounted.
BUILT TO LAST
Housing is made of cast aluminum with a thickness of 3/16" and is corrosion resistant. One coat of grey hammerpaint finish is applied. Axial vanes are stainless steel, dynamically and statically balanced to assure low noise level and vibration-free operation.
TESTED & LISTED TO THE HIGHEST STANDARDS
The GSV 009-016 Grease Fans are ETL Listed in the U.S. and Canada under file no. 514733. UL 705 Standard for Power Ventilators. UL 762 Standard for Power Roof Ventilators for Restaurant Exhaust Appliances. ULC-S645-93 Standard for Power Roof Ventilators for Commercial and Institutional Kitchen Exhaust Systems.
GSV PIZZA FAN FEATURES
NO RESTRICTIONS: Not restricted to any type of chimney or grease duct
EASY INSTALLATION: Installation at duct or chimney termination point; vertical or side-wall mounted!
BUILT TO LAST: Heavy cast-aluminum, corrosion-resistant fan housing & cast-aluminum centrifugal impeller
POWERFUL: Direct-drive, Class H insulated, variable-speed motor
HIGH COOKING TEMPERATURES: Approved for temperatures up to 575°
EASY MAINTENANCE: Fan housing can be opened for easy cleaning of the maintenance-free, permanently lubricated motor with sealed ball bearings
STANDARD EQUIPMENT: 2" x 4" or 4" x 4" Junction Box, Cover & Conduit
CAPACITY: 0-1, 750 CFM (0-2,975 m3/h)
MATERIAL: Cast Aluminum Housing & Stainless Steel Axial Vane
DRIVE: Axial Vane
MOTOR: Single Phase, Split Capacitor, Totally Enclosed, Class F Insulated, IP54 Protection Class. Sealed Ball Bearings, Variable Speed & Thermal Overload Protection
MAX. TEMPERATURE: 575° (300°C)
WARRANTY: Two-Year Factory Warranty, Ten-Year Warranty Against Corrosion Perforation
LISTINGS: UL 705 Standard for Power Ventilators, UL 762 Standard for Power Roof Ventilators for Restaurant Exhaust Appliances, ULC S645-93 Standard for Power Roof Ventilators & Commercial & Institutional Kitchen Exhaust Systems