Liners & Pipes

Liners & Pipes

A chimney flue liner or flue pipe is used to line the inside of a chimney or to vent a insert of stove. The liner or pipe serves several important functions, including protecting the chimney from the heat and corrosive gases produced by the fireplace or wood stove, and providing a smooth surface that allows smoke and other combustion byproducts to easily pass through or to the chimney.

Product
Qty in Cart
Quantity
Price
Subtotal

Choose Options

Ventinox/DuraFlex Tee, 316 Stainless (Removable Snout )

MSRP:

Now: $43.78 - $137.03

Was:

These Ventinox/DuraFlex Tees can be used to transition between liner and connector pipe at the wall thimble, or the rear flue outlet of an appliance. Featuring a 8" long, removable tee snout designed with internal draw bands, allowing for easier,...

SKU:

Ventinox/DuraFlex Tee, 316 Stainless (Removable Snout )

Weight:

2.00 LBS

MSRP:

Now: $43.78 - $137.03

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $43.78 - $137.03

Was:

Subtotal:

Choose Options
Choose Options

Ventinox/DuraFlex Sleeve, 316 Stainless Steel

MSRP:

Now: $19.94 - $48.38

Was:

Use this Sleeve, made with 316 titanium stainless steel, to join Ventinox Liner to an appliance flue collar. Just slide the liner into the flared end and tighten the locking band to hold it secure. This Sleeve can also be used with other adapters...

SKU:

Ventinox/DuraFlex Sleeve, 316 Stainless Steel

Weight:

1.00 LBS

MSRP:

Now: $19.94 - $48.38

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $19.94 - $48.38

Was:

Subtotal:

Choose Options
Choose Options

Ventinox/DuraFlex Installation Cone

MSRP:

Now: $53.13 - $89.68

Was:

Use these Installation Cones when pulling Ventinox Liner down and around bends. It features holes in the top for a knotted rope to pass through. Additional Info: Ventinox VFT Crafted from 316Ti stainless steel, Ventinox VFT is...

SKU:

Ventinox/DuraFlex Installation Cone

Weight:

1.00 LBS

MSRP:

Now: $53.13 - $89.68

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $53.13 - $89.68

Was:

Subtotal:

Choose Options
Choose Options

Ventinox/DuraFlex Bird Screen

MSRP:

Now: $13.24 - $37.72

Was:

Bird Screens fit into the cap, securing itself with tabs. The screen openings measure 1 ½" diagonally. Sizes correspond to Rain Cap diameter. For use with Ventinox/Duraflex Rain Caps Additional Info: Ventinox VFT ...

SKU:

Ventinox/DuraFlex Bird Screen

Weight:

0.00 LBS

MSRP:

Now: $13.24 - $37.72

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $13.24 - $37.72

Was:

Subtotal:

Choose Options
Choose Options

Ventinox/DuraFlex Storm Collar

MSRP:

Now: $25.41 - $84.75

Was:

The Storm Collar for Ventinox Liner tightens to the liner with a locking band, and fits over the raised lip on the top plate. When installing, run a bead of silicone around the base for added water protection. Although this product comes included...

SKU:

Ventinox/DuraFlex Storm Collar

Weight:

1.00 LBS

MSRP:

Now: $25.41 - $84.75

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $25.41 - $84.75

Was:

Subtotal:

Choose Options
Choose Options

Ventinox/DuraFlex Rain Cap

MSRP:

Now: $42.85 - $73.83

Was:

Ventionx/Duraflex Rain Caps are used to support a liner from the top and form a seal between the Storm Collar and the Top Plate. The top is removable for easy access to chimney cleaning. The rain caps install by tightening the locking band. ...

SKU:

Ventinox/DuraFlex Rain Cap

Weight:

2.00 LBS

MSRP:

Now: $42.85 - $73.83

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $42.85 - $73.83

Was:

Subtotal:

Choose Options
Choose Options

Ventinox/Duraflex Tee Cap, 316 Stainless Steel

MSRP:

Now: $14.80 - $46.08

Was:

Ventinox/Duraflex Tee Caps are made of 316 Stainless Steel and come with locking bands that slide over the bottom of the tee and tighten. Provides access for cleaning.Additional Info:Ventinox VFTCrafted from 316Ti stainless steel, Ventinox VFT is...

SKU:

Ventinox/DuraFlex Tee Cap, 316 Stainless Steel

Weight:

0.50 LBS

MSRP:

Now: $14.80 - $46.08

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $14.80 - $46.08

Was:

Subtotal:

Choose Options
Choose Options

DuraTech Extended Roof Bracket

MSRP:

$274.45

Was:

Extended Roof BracketUse to support the chimney when it extends more than 5’ above the roof. Provides stability to chimney against wind and snow. Mounting brackets and adjustable tubing included. Adjusts 67”-114”.

SKU:

DuraTech Extended Roof Bracket

Weight:

15.00 LBS

MSRP:

$274.45

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

$274.45

Was:

Subtotal:

Choose Options
Choose Options

DuraTech Wall Strap

MSRP:

Now: $64.78 - $157.59

Was:

Use these Wall Straps for interior or exterior installations to add support for DuraTech pipe runs! These wall straps are designed to provide 2" - 6" clearance to combustible walls, as well as fit multiple diameters of chimney pipe. DuraTech wall...

SKU:

DuraTech Wall Strap

Weight:

1.23 LBS

MSRP:

Now: $64.78 - $157.59

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $64.78 - $157.59

Was:

Subtotal:

Choose Options
Choose Options

DuraTech Termination Cap

MSRP:

Now: $140.56 - $470.76

Was:

These DuraTech Termination Caps are required where pipe terminates above the roof line. This Termination Cap easily twist-locks onto the end of DuraTech chimney pipe, allowing for quick removal and easy cleaning. These caps are made with stainless...

SKU:

DuraTech Termination Cap

Weight:

3.32 LBS

MSRP:

Now: $140.56 - $470.76

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $140.56 - $470.76

Was:

Subtotal:

Choose Options
Choose Options

DuraTech Anchor Plate

MSRP:

Now: $100.22 - $170.28

Was:

DuraTech Anchor Plates connect directly to a masonry fireplace or a factory-built fireplace that’s been listed for use with DuraTech. The plate is galvanized and features a stainless steel, DuraTech twist-lock starter piece. Remember to always check...

SKU:

DuraTech Anchor Plate

Weight:

2.22 LBS

MSRP:

Now: $100.22 - $170.28

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $100.22 - $170.28

Was:

Subtotal:

Choose Options
Choose Options

DuraTech Tee and Tee Cap

MSRP:

Now: $314.16 - $1,869.04

Was:

Use this Tee & Tee Cap for through-the-wall installations of DuraTech chimney pipe. Its one-piece design enhances its drafting capabilities, and includes an easy-to-remove Tee Cap for cleaning and inspection. Wall straps, a wall thimble and an...

SKU:

DuraTech Tee and Tee Cap

Weight:

3.00 LBS

MSRP:

Now: $314.16 - $1,869.04

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $314.16 - $1,869.04

Was:

Subtotal:

Choose Options
Choose Options

DuraTech Wall Thimble

MSRP:

Now: $123.43 - $722.45

Was:

This Wall Thimble for DuraTech chimney pipe can adjust from 5 1/2" - 9 ½", depending on width of the combustible wall that the pipe will be passing through. The interior trim plate is painted black. The thimble must be installed horizontally with the...

SKU:

DuraTech Wall Thimble

Weight:

5.58 LBS

MSRP:

Now: $123.43 - $722.45

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $123.43 - $722.45

Was:

Subtotal:

Choose Options
Choose Options

DuraTech Ceiling Trim Collars for Round Support Box

MSRP:

Now: $32.22 - $82.13

Was:

This DuraTech Ceiling Trim Collar conceals the gap between the Round Ceiling Support Box and the ceiling cutout. Select square or round.Painted black.Additional DuraTech Info:B )Featuring thermal blanket insulation between dual walls, DuraTech delivers...

SKU:

DuraTech Ceiling Trim Collars for Round Support Box

Weight:

2.00 LBS

MSRP:

Now: $32.22 - $82.13

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $32.22 - $82.13

Was:

Subtotal:

Choose Options
Choose Options

DuraTech Round Ceiling Support

MSRP:

Now: $164.21 - $1,251.96

Was:

These DuraTech Round Ceiling Support Boxes are designed to provide a positive connection between the support box and DuraTech chimney pipe with a built-in twist-lock feature. These support boxes have the capacity to support up to 60’ of chimney pipe...

SKU:

DuraTech Round Ceiling Support

Weight:

4.02 LBS

MSRP:

Now: $164.21 - $1,251.96

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $164.21 - $1,251.96

Was:

Subtotal:

Choose Options
Choose Options

DuraTech Elbow Strap - Galvalume

MSRP:

Now: $114.88 - $192.01

Was:

Constructed with durability and reliability in mind, the DuraTech Galvalume Elbow Strap is an essential component for effective chimney support systems. Designed specifically to alleviate stress on elbows during offset installations, this strap...

SKU:

DuraTech Elbow Strap

Weight:

2.00 LBS

MSRP:

Now: $114.88 - $192.01

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $114.88 - $192.01

Was:

Subtotal:

Choose Options
Choose Options

DuraTech Storm Collar

MSRP:

Now: $23.19 - $58.09

Was:

The DuraTech Storm Collar allows the installer to safely and easily connect and disconnect chimney sections. No locking bands required. Required with DuraTech flashing to create a weather-proof penetration through the roof deck. Seal inner...

SKU:

DuraTech Storm Collar

Weight:

0.60 LBS

MSRP:

Now: $23.19 - $58.09

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $23.19 - $58.09

Was:

Subtotal:

Choose Options
Choose Options

DuraTech Galvalume Chase Top Flashing

MSRP:

Now: $83.10 - $295.92

Was:

The Chase Top Flashing is made with galvalume, and encloses the top of the chase while providing a ventilation air passage. This product is UL listed, includes spacer clips, and requires a Storm Collar (sold separately) when installing. ...

SKU:

DuraTech Galvalume Chase Top Flashing

Weight:

2.20 LBS

MSRP:

Now: $83.10 - $295.92

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $83.10 - $295.92

Was:

Subtotal:

Choose Options
Choose Options

DuraTech Firestop Radiation Shield

MSRP:

Now: $96.52 - $439.47

Was:

The Firestop Radiation Shield is required for ceiling/floor penetrations when a ceiling support is not used, but is not required for passing through a roof. This shield fits on the ceiling side of the installation and adjusts in height to cover...

SKU:

DuraTech Firestop Radiation Shield

Weight:

6.88 LBS

MSRP:

Now: $96.52 - $439.47

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $96.52 - $439.47

Was:

Subtotal:

Choose Options
Choose Options

DuraBlack Trim Collar

MSRP:

Now: $23.03 - $61.13

Was:

Use as a decorative Trim Collar for DuraBlack connection to chimney. DuraBlack Additional Info:For a cost-effective, drip-free single-wall stovepipe, DuraBlack is a top choice. Engineered to DuraVent’s exacting standards, DuraBlack features die-formed...

SKU:

DuraBlack Trim Collar

Weight:

0.42 LBS

MSRP:

Now: $23.03 - $61.13

Was:

Choose Options

Qty in Cart: 0

Price:

MSRP:

Now: $23.03 - $61.13

Was:

Subtotal:

Choose Options

Total: items /

Adding your products to cart

View Cart Continue Shopping

Items 1 to 20 of 28 total

1
2
Next